Report Result

Back to Search

Safety Performance Evaluation of Michigan's 4x5 Portable Sign Support

REPORT NUMBER

TRP-03-135-03

AUTHORS

Karla Lechtenberg (Polivka), Ronald Faller, Jim Holloway, John Rohde, Dean Sicking

PUBLICATION DATE

2003-06-20

ABSTRACT

A wide variety of traffic controlling devices are used in work zones, some of which are not normally found on the roadside or in the traveled way outside of the work zones. These devices are used to enhance the safety of the work zones by controlling the traffic through these areas. Due to the placement of the traffic control devices, the devices themselves may be potentially hazardous to both workers and errant vehicles. The impact performance of many work-zone traffic control devices is mainly unknown and to date limited crash testing has been conducted, under the criteria of National Cooperative Highway Research Program (NCHRP) Report No. 350, Recommended Procedures for the Safety Performance Evaluation of Highway Features. The objective of the study was to evaluate the safety performance of Michigan's existing work-zone traffic control device through full-scale crash testing. A total of two full-scale crash tests were conducted on one 4-ft by 5-ft portable tall-mounted, rigid rectangular-shaped plywood panel sign support to determine its safety performance according to the Test Level 3 (TL-3) criteria set forth in the NCHRP Report No. 350. Neither of impacts on the tall-mounted, rigid panel sign supports resulted in acceptable safety performances. Following the analysis of these crash tests as well as the test results from other testing programs, it has been found that slight variations in design features of the work-zone traffic control devices can lead to very different performance results. Therefore, extreme care should be taken in applying crash test results from one work-zone traffic control device to similar work-zone traffic control devices with slight variations. The results of the crash tests were documented, and conclusions and recommendations pertaining to the safety performance of the existing work-zone traffic control devices were made.

KEYWORDS

Highway Safety, Rigid Panels, Portable Devices, Work Zone Safety, Roadside Appurtenances, Crash Test, Compliance Test

Other files to download

DRAWINGS